Products for Industry
Solvent Recovery Unit GAS410
Item Code : 212774
Model : GAS410
Solvent Recovery Unit (GAS410)
Product Summary
Highly safe N2 gas sealed circulation system, which can be operated with a spray dryer unit
Features of Solvent Recovery Unit (GAS410)
- Features
- The Inert N2 Gas Sealed System is used to prevent external
discharge when combined with a spray dryer (ADL311SA or
GB-210A) when using an organic solvent. - Features
- Dehumidifier (Freezer) integrated in GAS410. No extra Freezer/
dehumidi-fier equipment needed - Features
- Compressor included, no need for a separate compressor to operate
the spray dryer ADL311SA when using organic solvent samples - Features
- Flammable or toxic solvents can be processed by combining a N2 gas
sealed circulation system and a solvent recovery system (with freezer
and capacitor) - Features
- Explosion safety with closed loop N2 inert gas system
- Features
- Recovery of solvent to protect the environment and enable minimized
pollution. - Features
- Drying of easily oxidized materials is possible
- Features
- Supports low temperature drying of materials that easily deform with
heat - Features
- No freezing risk due to organic solvent with aqueous solution mixtures
which could cause damage to the closed loop GAS410 system - Features
- Spray drying and recovery of products and solvents are performed with
meticulously devised safety measures
Specifications
Specifications
Item Code | 212774 |
---|---|
Model | GAS410 |
Solvent recovery system | Capacitor + freezer |
Circulating gas | N2 gas (sealed circulation when connected to ADL311SA or GB-210A) |
Circulating volume flow | 0.12 to 0.65m3/min |
Compressor (for spraying) | Linear compressor integrated |
Circulation blower | Roots blower |
Solvent recovery container | 2L flask |
Freezer | Air-cooled condensation full-sealed type: 400W R404A (GWP:3920) |
Solvent recovery mechanism | Capacitor cooling mechanism |
Filter | Cartridge filter |
Instruments | Cooling trap temperature display monitor Filter differential pressure meter (Monitor for clogging of filter) O2 density display monitor Blower wind amount adjusting volume |
O2 sensor | Solid electrolyte (Zirconium) limit current type |
Pump | For circulation to measure Oxygen |
Safety device | O2 density meter, Flammable gas alarm, Electric leakage breaker, N2 gas forced introduction (when removing nozzles) |
Required N2 amount | 15 L/h at 0.1 MPa |
Accessories | Set of connection parts, anti-seismic clamps, interface cable, sample gas for gas alarm inspection, 2L flask |
External dimensions(W×D×H mm) | 700×950×1500mm |
Power Source |
AC200-AC240V
Single phase AC200〜240V 5A(15A) |
Weight | 130kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.