SINCE 1889 Yamato Scientific Co.,Ltd.
Contact Us   Site Map JapaneseChinese
Products Support Corporate Profile Global Network Contact Us
HOMEProductsDrying OvenDNE401/411/601/611/811/911
*
Industrial & Laboratory Constant Temperature Ovens
DNE401/411/601/611/811/911
*


DNE401/601


Available Various Functions
  • Incorporates with maximum 99 steps, 99 patterns program controller with repeat function.
  • Loaded with Total Operation Hours Timer
  • Data acquisition from internal test device is easy because of cable holes
High-performance, energy-saving, programmble constant temperature, forced convection ovens.
Due to high precision control system, high performance temperature control is realized, and the CO2 discharge, power discharge also displayed at the monitor.
The DNE series represents forced convection constant temperature oven. They achieve an energy-saving rate of 30 to 40% compared to previous models.
Model
401/411 601/611 811 911
Operating Temperature Range
Room temp. +20deg.C to 210deg.C
Temp. Distribution Accuracy
±2.0deg.C (at210deg.C)
Internal Capacity (L)
90 150 300 540
PDF Catalog

Specifications
Model DNE401/411 DNE601/611 DNE811 DNE911
 Performance
Circulation method Forced air circulation
Operating temperature range Room temp. +20 to 210deg.C Room temp. +15 to 210deg.C
Temp. adjustment accuracy ±0.5deg.C (at 210deg.C)
Temp. distribution accuracy ±2.0deg.C (at 210deg.C)
Max. temp. reaching time Approx. 60 min. Approx. 70 min. Approx. 45 min. Approx. 60 min.
 Components
Interior/Exterior material Stainless steel /Electro-galvanized steel sheet with epoxy and melamine resin baking finish
Heat insulating material Glass wool
Heater Stainless pipe heater, Stainless pipe heater, Stainless pipe heater, Stainless pipe heater,
1.1 kW 1.2 kW 1.2 kW×2 1.5 kW×2
Fan Type Scirocco fan
Motor Condenser type,10W Condenser type,30W Condenser type,30W×2
Cable hole/Air in-take hole 33mm I.D. (the right side) 1pc.
Exhaust port 33mm I.D.×2(the top) 33mm I.D.×2(the back)
 Controller
Temp. controller PlD Z control by microprocessor
Temp. setting method Digital setting by UP/DOWN key
Temp display method Digital Display by Green LED
Timer/Min.division 0 min. to 99 Hrs. 59 min. /1 min.
Operation function Fixed temperature operation, Program operation, Auto start, Auto-stop, Quick Automatic stop
Program mode Program operation; Maximum 32 steps, Repeat function
Additional functions Timer Function (Actual Timer within 24hrs.), Total Operation Hours Timer (to 65535hrs.), calendar time ( 24 hours), calibration offset, Power discharge, CO2 discharge, power failure return mode, user configuration information
Heater circuit control Triac zero-cross control
Sensor K-thermocouple
 Safe Device
Safety countermeasures Self diagnosis functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
 Standard
Internal dimensions (W×D×Hmm) 450×450×450 600×500×500 600×500×1,000 1,090×500×1,000
External dimensions(W×D×Hmm) 580×645×860 730×695×910 730×695×1,660 1,220 ×695×1,660
Internal capacity 90 liters 150 liters 300 liters 540 liters
Shelf plate with standard load Approx. 15kg/piece
Shelf rest step number 11 steps 13 steps 29 steps 29 steps
Shelf rest pitch 30 mm
Power source 50/60Hz AC 100V/AC200V AC 100V/AC200V AC 200V/220V AC 200V/220V
single phase single phase single phase single phase
12A/6A 14.5A/7.5A 13A/11.8A 16A/14.5A
weight Approx. 63 kg Approx. 77 kg Approx. 92 kg Approx. 185 kg
 Accessories
Shelf plate Stainless steel, 2 pcs. Stainless steel, 4 pcs. Stainless steel, 8 pcs.
Shelf bracket 4 pcs. (1 pair - 2 pcs. is fixed) 8 pcs. (Same as left) 16 pcs. (2 pairs are fixed)

* The performance shown here is the value under the condition of the ambient temperature of 23deg.C±5deg.C, humidity of 65%RH±20%.

* The projection is not included for Internal dimensions and External dimensions.


Control Panel

Temp.Rising Curve

Dimensions (mm)

Optional items
Model No. DNE401/411 DNE601/611 DNE811 DNE911
Stand ON61(211856) -
OT42 (212348) OT62 (212349) -
Stacking support ODN26 (212806) ODN28 (212807) -
Shelf
(with support 2 pcs.)
212246 212266 212266 212490
Cable port, 25mm dia ODM36(281454)
Cable port, 50mm dia ODM38(281455)
Sheath sensor  ODT48 (212946)
Silicon Stopper ODT52 (212947)
Seismic isolation rubber 296902 -
Observation window ODM40(281456) ODM42(281457) -
External communication function (RS485) ODM12(281442) ODM14(281443)
External communication adapter  OIN90 (211880)
Temperature output terminal
(4-20mA)
ODM16(281444) ODM18(281445)
External alarm terminal ODM20(281446) ODM22(281447)
Time-up output terminal ODM24(281448) ODM26(281449)
Working signal output terminal ODM28(281450) ODM30(281451)
Event alarm output terminal
(4 points output)
ODM32(281452) ODM34(281453)
Stand

ON Model

OT Model
Mounting Parts
Shelf (with 2 support)

Stainless Punching Metal
(Weight Tolerance 15kg/pc)
Produts
New Produts
Ovens
Laboratory Incubator
Products for Industry
Autoclave, Sterilizers
Plasma Cleaner, Asher
Freeze Dryer
Water Purifier
Rotary Evaporator
Water Circulator
Muffle Furnace
Water Bath
Spray Dryer
Laboratory Shaker
Laboratory Washer
Laboratory Stirrer
Laboratory Facilities
Vacuum Pump
For Biotechnology
X-Ray CT Scanner
Other Products
Product Brochure


Top
Privacy Policy
Copyright c 2012 YAMATO SCIENTIFIC CO., LTD. All rights reserved.