SINCE 1889 Yamato Scientific Co.,Ltd.
*
Water Purifier Pure Water, Labo Cube Series
WE300
*
*

 WE300 has been discontinued.

A highly pure water production unit that supports Labo Cube and can be installed in a draft chamber or a sink.

Water obtaining system
Reverse osmosis method - Ion exchange method
Obtained pure water
Ion exchange water
Specific resistance
10 Mohm.cm or more
Water quality level
A3 equivalent

PDF Catalog
  • By installing this product under a draft chamber or a sink to perform washing, various test, obtaining ion exchange water for preparing regents easily.
  • Reverse osmosis membrane (RO membrane) activated charcoal effectively removes organic materials. This enables you to obtain ion exchanged water of stable quality.
  • Enables you to obtain water at high collection rate of 16 L/h.
  • The unit employs a preprocess cartridge Progard3 and an ion exchange cartridge Q-GardA.
  • Also equipped with a water leak detection function that stops water supply in case water leak occurs as a safety function.
  • Equipped with a water obtaining unit with a handy switch (delivery kit) for obtaining water.

Specifications
Product code 253626
Model WE300
Performance
Water obtaining system Reverse osmosis method - ion exchange method
Water supply/discharge system Connected to tap water with a hose
Quality of obtained water A3 ion exchange water
Obtained amount and system of ion exchange water Approx. 16 L/h Continuous obtaining of water
Specific resistance Approx.10Mohm cm (at water temperature: 25 deg.C)
Microorganism 10 CFU/mL
Fine particles Filtered with 0.22 um filter
Silica 0.05 mg/L or less
Configuration
Preprocess cartridge With activated charcoal (Progard3)
Ion exchange resin cartridge 2.4L ion resin cartridge (Q-GardA)
Ion exchange water primary storage tank 10L tank
Integrated pump RO pump, pure water supply pump
Water leakage detection Water supply solenoid valve is forced to shut off when water leakage is detected
Ion exchange water obtaining bed Resin water obtaining port
Standards
Raw water pressure range 0.1 to 0.3 MPa (L/min)
Supply water rate 41 L/h
Water temp. 2 to 35 deg.C
Power source AC 100V 0.8A
External dimensions*/weight 460 x 400 x 600 mm (W/D/H) Approx. 37 kg (Dispenser Approx. 5 kg)
Display & settings
Water quality display Conductivity is displayed in 5 steps LED
Other displays Consumables replacement display (preprocess cartridge, ion exchange resin), alarm display (water leak alarm)
Accessory
Accessories Raw water supply hose, preprocess cartridge & ion exchange cartridge, pure water hose for obtaining water, water obtaining bed (delivery kit), operating manual, warranty card

* External dimensions do not include protrusions.
A water faucet and drain facility (or a sink) are necessary for installing this unit.


*Example of water quality analysis with WE300 (conforms to the NCCLS Type1 Water specifications)
Item Specifications
Specific resistance (at 25 deg.C) >=10 Mohm cm
Organic material Removed with reverse osmosis (RO) and activated charcoal
Microorganism =< 10 CFU/mL
Fine particles Filtered with 0.22 um filter
Silica (as SiO2) =< 0.05 mg/L


Control panel *
Installation example
*
 
*Delivery kit (standard)
*

Block diagram
*

Dimensional drawing (mm) *Consumables
* *
Left:
Preprocess cartridge Progard 3
Right:
Ion exchange cartridge Q-GardA

Optional items
Item name Product code
Preprocess cartridge
Progard3
PR0G000003
Ion exchange resin
cartridge Q-GardA
CP2ALLRES
RO membrane
(2 in a set)
CDRC602JH