SINCE 1889 Yamato Scientific Co.,Ltd.
Contact Us   Site Map JapaneseChinese
Products Support Corporate Profile Global Network Contact Us
HOMEWhat's New2013/12/19
*
2013/12/19
Maintenance Tip 3: Routine Maintenance for your Yamato Water Purifier (WG Series)
*


To promote longevity of your WG series Water Purifier, we recommend that you carry out regular checks and a few simple steps to maintain its performance.

The following items are recommended to be added to your maintenance routine for the product:

Maintenance/check items Reference for timing Remarks
Replacement of pre-treatment cartridge Apprix. 6 months
Exchange message appears on the indication area.
Throughput: About 5000 liters of city water in Tokyo.
If the quality of raw water is not good, perform this maintenance as soon as possible.
Replacement of membrane filter Apprix. 3 months
Exchange message appears on the indication area.
Throughput: apprix. 500 liters for pure water.
Need to exchange if the amount of collection is less than the above value.
Replacement of ion exchange resin cartridge Exchange message appears on the indication area.
(Displayed when the conductivity of pure water is more than 1 x 10-4 S/m.)
Throughput: About 700 liters of the raw water of 200 x 10-4 S/m. (1400 liter for WG1000 type)
Cleaning of distiller 3 months If the quality of raw water is not good, start the operation as soon as possible.
Cleaning of water supply hose filer 6 months
Replacement of hose 2 years Connections shall be checked monthly.
Drainage of distilled water tank 3 months IF not used for a long time, drain water from the tank.



For more information, please contact: International Sales Department
Tel: 81-3-5639-7076

Top
Privacy Policy
Copyright © 2012 YAMATO SCIENTIFIC CO., LTD. All rights reserved.